DIN 934 Hex Nuts – metric hexagon brass nuts and internal thread fasteners

DIN 934 hex nuts – Metric hexagon-head internal-thread fasteners – brass hexagon nuts

DIN 934 hex nuts, also known as hexagon nuts, has metric coarse thread and fine thread.  DIN934 hexagon brass nuts are often used with bolts and screws.

Comparing the hex nuts metric coarse thread and fine thread, we can see that the self-locking ability and locking ability of the coarse hexagon nut are worse than that of the fine-tooth hexagon nut, but the locking force is greater than that of the fine-tooth hexagon nut; the fine-tooth hexagon nut has good locking performance, which is suitable for anti-vibration and easy to adjust the clearance, but the locking force is worse than that of the coarse hexagon nut, so it is suitable for the place where the clearance or torque should be adjusted.

In general, the coarse thread is used if there is no special requirement.

DIN934 brass hexagon nuts are one of the most common nuts.  The brass hex nuts are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads.

Din 934 brass hex nuts – Grade A (applicable to nominal thread diameter D ≤ 16 mm) and grade B (suitable for d > 16 mm) nuts are used in machines, equipment, or structures with small surface roughness and high precision requirements. It is characterized by a relatively large tightening force, which can be installed with a movable wrench, an open-ended wrench, or a spectacle wrench, all of which require a larger operating space.

Parts4world supply various of metric standard thread fasteners & custom thread fasteners. The DIN934 hex nuts, hexagon thread fasteners and other inch and metric industrial internal thread fasteners all are available for standard fasteners or custom requirements.

DIN 934 Hex Head Nuts (Brass or Copper) – Hex Head Internal Thread Fasteners

Measurement Unit: Metric (mm) / Imperial (inch)

m – thickness (Optional)

s – size of the hexagon

e – the diameter of the circumscribed circle

Specification information:

Just let us know what spcifications of the DIN934 you wanted:  Size x M, for example M6*30 mm (M6: thread diameter, 30mm: nut thickness)

DIN934 – Equivalent Norms:

DIN 934, ISO 4032, ISO 8673, CSN 21401, DIN EN 24032, PN 82144, UNI 5588, EU 24032, ANSI B18.2.4.1M, GB 6172

Custom-made design of Hex head nuts DIN934 are available.  OEM orders are welcome.  Just visist our website for order any custom machined parts:  https://www.parts4world.com